Cobra Automotive 4600 Manual de Instalação Página 1

4600 CAN/PLIPINSTALLATION MANUAL

GREENWHITEBROWN3 ABLUEORANGE-BLACKGREY-BLACKYELLOW-BLACKBLACKORANGEVIOLETVIOLET-BLACKGREEN-REDREDORANGEVIOLETGREYYELLOWYELLOW-GREENYELLOW-WHITEREDBLAC

ORANGEVIOLETJ12J253 ABLACKBLACKOKPASSTXLEDRX1N4004WHITE wire J17WHITE wire J 17WHITE wire J 17EFC DG RED ( TX)RXTXAntennaRXTXU.S. sensors, ledpanel an

INSTALLATION MANUAL 4600 CAN/PLIP176.8 - Emergency disarming.If the vehicle original remote control get lost or if it doesn’t work, open the door with

INSTALLATION MANUAL 4600 CAN/PLIP187. - PROGRAMMABLE FUNCTIONS.To activate them refer to the “FUNCTIONS PROGRAMMING” table.7.1 - Activation and volume

INSTALLATION MANUAL 4600 CAN/PLIP19The driver recognition must happen any time the ignition key is turned to the ON position or when, with the ignitio

INSTALLATION MANUAL 4600 CAN/PLIP20PROCEDURE:a. Open the driver side door.b. Open the bonnet.c. Connect the main unit blue wire to GND (only when a wi

INSTALLATION MANUAL 4600 CAN/PLIP219.- FUNCTIONAL TEST.During the fi rst 25 s after the system has been armed all protection functionalities can be tes

INSTALLATION MANUAL 4600 CAN/PLIP22A. Power the main unit by connecting the 26 ways connector.B. Connect the main unit blue wire to GND (only when a

INSTALLATION MANUAL 4600 CAN/PLIP232314. - FOR UK MARKET ONLYCategory 1,2 or 2-1 systems permanently installed as aftermarket equipment by import or

INSTALLATION MANUAL 4600 CAN/PLIP2Summary1.KIT CONTENTS...

Cobra Automotive Technologiesvia Astico 41 - 21100 VARESE - ITALYwww.cobra-at.com06DE3325B - 10/11 2.32

INSTALLATION MANUAL 4600 CAN/PLIP31. - KIT CONTENTS.The following are the main parts supplied in the kit:- Main alarm unit. - Remote controls and/or

INSTALLATION MANUAL 4600 CAN/PLIP4The list on the right side of the screen shows the product families. Clicking on the link you will get the full app

INSTALLATION MANUAL 4600 CAN/PLIP54. - HOW TO PREPARE THE PIN CODE CARD.Remove the separate PIN Code label from the back of the system main unit and

INSTALLATION MANUAL 4600 CAN/PLIP6Antennas.The RF antennas positioning (for both the main unit and the siren) is crucial for a proper system’s perform

INSTALLATION MANUAL 4600 CAN/PLIP7J-22 Do not connect.J-23 Negative input for additional modules: to be used as a triggering input for the connection

INSTALLATION MANUAL 4600 CAN/PLIP8J-22 positive/negative perimetric input: to be connected to the vehicle roof lamp. The system confi gures automatical

GREENWHITEBROWNYELLOWYELLOW-GREENYELLOW-WHITE15 A3 AYELLOW-BLUEBLACKORANGEVIOLETYELLOW-BLUEBLACKREDREDORANGEVIOLETGREENGREYORANGE-BLACKGREY-BLACKYELLO